HELIX IK W6 – 6 CAR SUBWOOFER. Rich bass out of compact dimensions. The chassis of the K subwoofer series can all be used in very compact enclosures in which they perform magnificently with exceptional bass performance. Especially when it comes to using the available space in the vehicle as good as possible due to an individual enclosure design, these woofers open up completely new possibilities for installation without making any acoustic compromises. Clever down to the last detail. The extremely stiff cone made of hand-scooped paper fibers in connection with the heavy-duty driver system not only converts amplifier power easily and without compression effects into loads of sound pressure, but also scores sonically with subtle beats. Designed as a 1 x 2 Ohms (SVC2) or 2 x 2 Ohms (DVC2) variant, you can find the right low bass specialist for any amplifier configuration to get the maximum performance out of it. “All inclusive” for the do-it-yourselfer. In addition, the solid protective grille and gasket are also included. For optimal bass performance in DIY installations you can find recommendations for sealed and vented enclosures with all parameters such as net volume, port tuning frequency as well as DSP settings in our technical data sheet. 1 x 2 Ohms single voice coil. Powerful magnet system for compact vented enclosures. Extremely stiff, hand-scooped paper cone. Gold-plated terminals for maximum conductivity. Rugged magnet cover with HELIX lettering for perfect magnet protection. IK W6-DVC2 – 2 x 2 Ohms. 150 / 300 Watt. 2 x 2? 2 x 2.0? Voice coil winding height. +/- 6.0 mm. 164.2 mm / 6.46. 132.5 mm / 5.22. 74.3 mm / 2.93. 34 cm (angled port). Lower limiting frequency (-3dB). Recommended “self-define” highpass filter with 45 Hz cut-off frequency and Q = 1.2; additional EQ filter 80 Hz / Q = 1.0 / +1.0 dB. 1 x Subwoofer HELIX IK W6-DVC2 1 x Grille 1 x Gasket 1 x Data sheet.
