Welcome to CEN Automotive. Order by 2PM weekdays for Same Day Dispatch. JL Audio ACP112LG-TW1 12 Active Subwoofer MicroSub+ DCD Amplifier 400w RMS. Single 12TW1 MicroSub+T with DCDT Amplifier, Ported, 0.25 O. Amplified Subwoofer System with Single 12TW1-0.25 Subwoofer, Built-In 400W Class D Amplifier, Black Carpet – Ported Enclosure. With MicroSub+T systems, the power is built right into the subwoofer system. Housing a proprietary Class D amplifier, this incredible subwoofer system utilizes our exclusive DCDT amplifier technology to extract maximum output from its specially engineered, ultra low-impedance TW1 driver. By combining direct power conversion with an ultra-high current output section, DCDT amplifiers are free of conventional switching power supplies, enabling them to generate remarkable power with unprecedented efficiency. Key to the enclosure’s performance is its efficient slot-ported design and precise tuning of its 12TW1 Subwoofer. Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure’s internal volume relative to its exterior volume. The port wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The flared port entry and exit further enhance sound quality by minimizing air-flow noises through the port. Integration to OEM and aftermarket head units is a snap thanks to a variety of input options and automatic turn-on capability (via signal sensing or DC offset sensing). Also included is a variable frequency low-pass filter (50-200 Hz), along with output polarity control switch. A quick-disconnect power connector makes it easy to remove the subwoofer when you need the extra space. As with all MicroSubT systems, these amplified versions produce the kind of output and extension normally associated with much larger systems. Note: DCDT amplified systems use very specific components. Never use a DCDT amplifier or its companion subwoofer(s) with incompatible, non-DCDT products. Finish: Black, high-grade automotive carpet with silver “JL AUDIO” embroidery on front baffle. A steel mesh grille is included to protect the Subwoofer. Construction: CNC-Cut High-Grade MDF. Nominal Impedance: 0.25 O. Enclosure and Subwoofer Built in USA with global components. System Nominal Impedance 0.25 O. Recommended Copper Power / Ground Wire Gauge 8 AWG wire. Enclosure Type Slot-ported, Low-profile. Grille Included Black Steel Mesh. Filter Mode(s) Low-Pass only. Filter Slope(s) 12 dB/octave. Filter Frequency Range 50 Hz – 200 Hz. Output Polarity Switch Yes. Remote Subwoofer Level Control Optional (RBC-1). External Width (W) 23.75 in / 603 mm. External Height (H) 15.75 in / 400 mm. External Depth (D) 9.25 in / 235 mm. Net Weight 40.4 lb / 18.33 kg. Black metal grilles (installed). Power connection plug (installed). 30-amp ATO fuse (installed). Speaker level input harness. This item is in the category “Vehicle Parts & Accessories\In-Car Technology, GPS & Security\In-Car Entertainment\Subwoofers”. The seller is “cenautomotive” and is located in this country: GB. This item can be shipped to United Kingdom.

• Brand: JL Audio
• MPN: ACP112LG-TW1
• Model: ACP112LG-TW1
• Manufacturer Part Number: ACP112LG-TW1
• Colour: Black
• Custom Bundle: No
• Modified Item: No
• Unit Type: Unit
• Features: Bass Box, Ported Enclosure, Built in Amp
• Number of Driver: 1
• Impedance: 4 Ω
• Placement on Vehicle: Boot
• Size: 12 Inch
• Series: TW1
• RMS Power: 400w
• Driver: Subwoofer
• Warranty: 2 Year Warranty
• Manufacturer: JL Audio
• Type: Active Enclosure
• Voice Coil: Dual
• Manufacturer Warranty: 2 Year Warranty
• Authorised Dealer: CEN Automotive
• Reference OE/OEM Number: ACP112LG-TW1
• EAN: 699440402477

Welcome to CEN Automotive. Order by 2PM weekdays for Same Day Dispatch. JL Audio ACP110LG-TW1 10 Active Subwoofer MicroSub+ DCD Amplifier 400w RMS. Single 10TW1 MicroSub+T with DCDT Amplifier, Ported, 0.25 O. Amplified Subwoofer System with Single 10TW1-0.25 Subwoofer, Built-In 400W Class D Amplifier, Black Carpet – Ported Enclosure. With MicroSub+T systems, the power is built right into the subwoofer system. Housing a proprietary Class D amplifier, this incredible subwoofer system utilizes our exclusive DCDT amplifier technology to extract maximum output from its specially engineered, ultra low-impedance TW1 driver. By combining direct power conversion with an ultra-high current output section, DCDT amplifiers are free of conventional switching power supplies, enabling them to generate remarkable power with unprecedented efficiency. Key to the enclosure’s performance is its efficient slot-ported design and precise tuning of its 10TW1 Subwoofer. Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure’s internal volume relative to its exterior volume. The port wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The flared port entry and exit further enhance sound quality by minimizing air-flow noises through the port. Integration to OEM and aftermarket head units is a snap thanks to a variety of input options and automatic turn-on capability (via signal sensing or DC offset sensing). Also included is a variable frequency low-pass filter (50-200 Hz), along with output polarity control switch. A quick-disconnect power connector makes it easy to remove the subwoofer when you need the extra space. As with all MicroSubT systems, these amplified versions produce the kind of output and extension normally associated with much larger systems. Note: DCDT amplified systems use very specific components. Never use a DCDT amplifier or its companion subwoofer(s) with incompatible, non-DCDT products. Finish: Black, high-grade automotive carpet with silver “JL AUDIO” embroidery on front baffle. A steel mesh grille is included to protect the Subwoofer. Construction: CNC-Cut High-Grade MDF. Nominal Impedance: 0.25 O. Enclosure and Subwoofer Built in USA with global components. System Nominal Impedance 0.25 O. Recommended Copper Power / Ground Wire Gauge 8 AWG wire. Enclosure Type Slot-ported, Low-profile. Grille Included Black Steel Mesh. Filter Mode(s) Low-Pass only. Filter Slope(s) 12 dB/octave. Filter Frequency Range 50 Hz – 200 Hz. Output Polarity Switch Yes. Remote Subwoofer Level Control Optional (RBC-1). External Width (W) 21 in / 533 mm. External Height (H) 13.5 in / 343 mm. External Depth (D) 6.625 in / 168 mm. Net Weight 25.0 lb / 11.34 kg. Black metal grilles (installed). Power connection plug (installed). 30-amp ATO fuse (installed). Speaker level input harness. This item is in the category “Vehicle Parts & Accessories\In-Car Technology, GPS & Security\In-Car Entertainment\Subwoofers”. The seller is “cenautomotive” and is located in this country: GB. This item can be shipped to United Kingdom.

• Brand: JL Audio
• MPN: ACS110LG-TW1
• Model: ACP110LG-TW1
• Manufacturer Part Number: ACP110LG-TW1
• Colour: Black
• Custom Bundle: No
• Modified Item: No
• Unit Type: Unit
• Features: Bass Box, Ported Enclosure, Built in Amp
• Number of Driver: 1
• Impedance: 4 Ω
• Placement on Vehicle: Boot
• Size: 10 Inch
• Series: TW1
• RMS Power: 400w
• Driver: Subwoofer
• Warranty: 2 Year Warranty
• Manufacturer: JL Audio
• Type: Active Enclosure
• Voice Coil: Dual
• Manufacturer Warranty: 2 Year Warranty
• Authorised Dealer: CEN Automotive
• EAN: 699440933322