JL Audio 12TW1-4 12 300 Watts Shallow Mount Subwoofer Bass Subwoofer

JL_Audio_12TW1_4_12_300_Watts_Shallow_Mount_Subwoofer_Bass_Subwoofer_01_tbb
JL Audio 12TW1-4 12 300 Watts Shallow Mount Subwoofer Bass Subwoofer
JL Audio 12TW1-4 12 300 Watts Shallow Mount Subwoofer Bass Subwoofer
JL Audio 12TW1-4 12 300 Watts Shallow Mount Subwoofer Bass Subwoofer
JL Audio 12TW1-4 12 300 Watts Shallow Mount Subwoofer Bass Subwoofer
JL Audio 12TW1-4 12 300 Watts Shallow Mount Subwoofer Bass Subwoofer
JL Audio 12TW1-4 12 300 Watts Shallow Mount Subwoofer Bass Subwoofer
JL Audio 12TW1-4 12 300 Watts Shallow Mount Subwoofer Bass Subwoofer
JL Audio 12TW1-4 12 300 Watts Shallow Mount Subwoofer Bass Subwoofer
JL Audio 12TW1-4 12 300 Watts Shallow Mount Subwoofer Bass Subwoofer
JL Audio 12TW1-4 12 300 Watts Shallow Mount Subwoofer Bass Subwoofer
JL Audio 12TW1-4 12 300 Watts Shallow Mount Subwoofer Bass Subwoofer
JL Audio 12TW1-4 12 300 Watts Shallow Mount Subwoofer Bass Subwoofer

JL Audio 12TW1-4 12 300 Watts Shallow Mount Subwoofer Bass Subwoofer
Mens / Womens Shavers. JL Audio 12TW1-4 12 300 Watts Shallow Mount Subwoofer Bass Subwoofer. Built on JL Audio’s patented thin-line subwoofer technology, the 12TW1 delivers a powerful combination of shallow mounting depth and excursion capability, while operating in insanely small enclosures 0.65 cu. / 18.4 liters. This, combined with a special cast alloy frame design, makes the 12TW1 capable of operating in extremely tight spaces. These include under-seat installations in trucks, 2-seat sports cars and many other creative applications requiring a compact, low profile subwoofer design. JL Audio’s patented thin-line woofer technology compresses the architecture of the 12TW1 using a “concentric tube” structure built into the injection-molded cone body. This structure supports the voice coil and a full annular spider, while permitting the placement of a large motor structure further forward in the speaker than with conventional designs. The 12TW1 also features a clever frame design that minimizes the frontal clearance required for the excursion of the driver. This is accomplished by recessing the suspension attachment surface, so that most of the forward excursion occurs within the frame’s dimensions. Thanks to this feature, the 12TW1 requires only 0.87 inches (22 mm) of frontal clearance, even with its grille installed. This allows for more efficient use of space and increased enclosure volume within a given overall depth. Even though the 12TW1 is optimized for an enclosure much smaller than any other JL Audio twelve-inch Subwoofer, it never sounds like a big woofer struggling in a tiny box… Instead, it delivers all the rich, deep, controlled bass you have come to expect from a JL Audio subwoofer system. Very shallow mounting depth (4.62 in / 117 mm). No pole vent: permits mounting close to rear wall of enclosure. Extremely small sealed enclosure volume requirements. Long linear excursion capability (0.40 in / 10 mm, one-way). Patented “concentric tube” architecture. Patented “floating cone attach method” technology. Cast alloy frame with flat edges for tight driver grouping. Injection molded, mica-filled polypropylene cone. Steel mesh grille included with each driver. Precision-built in USA at JL Audio’s Miramar, Florida factory with global components. Recommended Amplifier Power (RMS) 75 – 300 W. Nominal Impedance (Znom) 4? Nominal Diameter 12.0 in / 300 mm. Overall Diameter (A) 12.375 in / 314 mm. Mounting Hole Diameter (B) 11.0625 in / 281 mm. Bolt Hole Circle Diameter (C) 11.7 in / 297 mm. Motor Outer Diameter (D) 5.71 in / 145 mm. Mounting Depth (E) 4.62 in / 117 mm. Front Grille Protrusion (F) 0.87 in / 22 mm. Driver Displacement 0.072 cu ft / 2.04 L. Net Weight 16.5 lb / 7.5 kg. Free Air Resonance (Fs) 32.35 Hz. Electrical “Q” (Qes) 0.555. Mechanical “Q” (Qms) 11.066. Total Speaker “Q” (Qts) 0.529. Equivalent Compliance (Vas) 1.189 cu ft / 33.67 L. One-Way Linear Excursion (Xmax) 0.40 in / 10.0 mm. Efficiency (1 W / 1 m) 85.15 dB SPL. Effective Piston Area (Sd) 67.608 sq in / 0.0436 sq m. DC Resistance (Re) 3.514? Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied. Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is “louder”. Wall Thickness 0.75 in / 19 mm. Front Baffle Thickness 0.75 in / 19 mm. 0.65 cu ft / 18.41 L. External Width (W) 26.50 in / 673 mm. External Height (H) 14 in / 356 mm. External Depth (D) 5.50 in / 140 mm. F3 45.44 Hz. Fc 54.41 Hz. The enclosure recommendations listed above are external dimensions which assume the use of 0.75 in (19 mm) thick material. If you are using 0.625 in (16 mm) thick material, subtract 0.25 in (6.5 mm) from each dimension. Do not use any material with a thickness of less than 0.625 in (16 mm) as this may compromise the rigidity of the enclosure. All enclosure volumes listed above are net internal volumes! Driver displacement, port displacement and brace displacement must be added to obtain the final gross internal volume. All enclosure dimensions above have already taken this into account. When using multiple subwoofers in a common enclosure you will need to recalculate the enclosure and port dimensions. We recommend the use of this speaker in a bi-amplified system using high-quality satellite speakers and a high-quality amplifier. We do not recommend the use of this subwoofer with a passive crossover (coil), as this type of device will adversely affect performance. All specifications are subject to change without notice. Prolonged exposure to sound pressure levels in excess of 100dB can cause permanent hearing loss. This high-performance speaker can exceed this level. Please exercise restraint in its operation in order to preserve your ability to enjoy its fidelity. When installing a subwoofer in your vehicle, it is extremely important to secure the enclosure firmly. We recommend bolting the enclosure through the metal of the floorpan or the frame of the vehicle with large diameter washers for reinforcement. If an enclosure is not firmly attached, it can become a projectile in a collision. This is particularly important in a hatchback, station wagon, sports utility vehicle, or van. 1.125 cu ft / 31.86 L. External Width (W) 31.75 in / 806 mm. External Height (H) 16 in / 406 mm. External Depth (D) 7 in / 178 mm. Internal Slot Port Width (SW) 5.50 in / 140 mm. Internal Slot Port Height (SH) 2.25 in / 57 mm. Internal Slot Port Length (SL) 22.625 in / 575 mm. Port Extension Length (EL) 20.75 in / 527 mm. Tuning Frequency (Fb) 34.0 Hz. F3 31.79 Hz.
JL Audio 12TW1-4 12 300 Watts Shallow Mount Subwoofer Bass Subwoofer

JL Audio 12TW1-4 12 Shallow Mount Subwoofer 4 ohm 300w RMS in Sealed Enclosure

JL_Audio_12TW1_4_12_Shallow_Mount_Subwoofer_4_ohm_300w_RMS_in_Sealed_Enclosure_01_qj
JL Audio 12TW1-4 12 Shallow Mount Subwoofer 4 ohm 300w RMS in Sealed Enclosure
JL Audio 12TW1-4 12 Shallow Mount Subwoofer 4 ohm 300w RMS in Sealed Enclosure
JL Audio 12TW1-4 12 Shallow Mount Subwoofer 4 ohm 300w RMS in Sealed Enclosure
JL Audio 12TW1-4 12 Shallow Mount Subwoofer 4 ohm 300w RMS in Sealed Enclosure
JL Audio 12TW1-4 12 Shallow Mount Subwoofer 4 ohm 300w RMS in Sealed Enclosure

JL Audio 12TW1-4 12 Shallow Mount Subwoofer 4 ohm 300w RMS in Sealed Enclosure
JL Audio 12TW1-4 Subwoofer in Sealed Enclosure. This item is in the category “Vehicle Parts & Accessories\In-Car Technology, GPS & Security\In-Car Entertainment\Subwoofers”. The seller is “an3har” and is located in this country: GB. This item can be shipped to United Kingdom.
  • Number of Driver: 1
  • Voice Coil: Single
  • Size: 12 Inch
  • Manufacturer Part Number: 12TW1-4
  • Driver: Subwoofer
  • MPN: 12TW1-4
  • Modified Item: No
  • Reference OE/OEM Number: 12TW1-4
  • Placement on Vehicle: Boot
  • Colour: Black
  • Brand: JL Audio
  • Series: TW1
  • Type: Subwoofer
  • Unit Type: Unit
  • Manufacturer: JL Audio
  • Model: 12TW1-4
  • Features: Shallow Mount
  • Impedance: 4 Ω
  • RMS Power: 300w
  • EAN: 699440990448

JL Audio 12TW1-4 12 Shallow Mount Subwoofer 4 ohm 300w RMS in Sealed Enclosure

Rockford Fosgate R2SD4-12 12 Prime 400W Slim Shallow Mount Car Subwoofer

Rockford_Fosgate_R2SD4_12_12_Prime_400W_Slim_Shallow_Mount_Car_Subwoofer_01_fs
Rockford Fosgate R2SD4-12 12 Prime 400W Slim Shallow Mount Car Subwoofer
Rockford Fosgate R2SD4-12 12 Prime 400W Slim Shallow Mount Car Subwoofer
Rockford Fosgate R2SD4-12 12 Prime 400W Slim Shallow Mount Car Subwoofer
Rockford Fosgate R2SD4-12 12 Prime 400W Slim Shallow Mount Car Subwoofer
Rockford Fosgate R2SD4-12 12 Prime 400W Slim Shallow Mount Car Subwoofer

Rockford Fosgate R2SD4-12 12 Prime 400W Slim Shallow Mount Car Subwoofer
Rockford Fosgate R2SD4-12 – 12 Prime 400W Shallow Mount Subwoofer. When you have no space for bass, our R2 12 shallow subwoofer can help satisfy your need for low frequency music. These drivers can fit in tight spaces due to an elevated motor structure that reduces speaker depth. Mica injected polypropylene cones make sure bass notes are clean and accurate. Stamp-cast baskets feature spider venting typically reserved for traditional depth mounted models to keep the motor cool! These shallow subwoofers are optimized for sealed enclosures. 12 AWG compression terminals. Anodized aluminium voice coil former. Optimized for sealed enclosures. Mica injected polypropylene cone. Linear spider with embedded 16 AWG tinsel leads. StampCast basket with integrated spider venting. Integrated PVC trim ring. Nominal Impedance Dual 4-Ohm. Mounting Depth3.602 in. Fs (Hz)30.3. Cut-out Diameter11.25 in. Sd (cm2) 534.8. Voice Coil Diameter2 (50 mm). Speaker Connector Dual 12 AWG compression. Woofer Displacement0.039 cu. Re (Ohms) 6.80. Magnet Weight (oz) 51 oz. Le (mH) 4.2. Vas (Litres) 65.4. Voice Coil Type Dual Voice Coil. Sealed Box Volume (Vb) 0.9 cu. Vented Box Volume (Vb) 1.79 cu. This includes the following areas: Jersey, Guernsey, Isle of Man, Isle of Wight, N. This item is in the category “Vehicle Parts & Accessories\In-Car Technology, GPS & Security\In-Car Entertainment\Subwoofers”. The seller is “caraudiodirect-uk” and is located in this country: GB. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Republic of Croatia, Cyprus, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Spain, Sweden, Norway, Switzerland, Guernsey, Iceland, Jersey.
  • Size: 12 in
  • Impedance: Dual 4Ω
  • Features: Slim, Shallow
  • MPN: Rockford Fosgate R2SD4-12
  • RMS Power: 250W
  • Manufacturer Part Number: R2SD4-12
  • Part Number: R2SD4-12
  • Subwoofer Size: 12\
  • Subwoofer Type: Subwoofer Speaker
  • Placement on Vehicle: Boot, Spare Wheel Recess, Under Seat
  • Brand: Rockford Fosgate

Rockford Fosgate R2SD4-12 12 Prime 400W Slim Shallow Mount Car Subwoofer

JL Audio 10TW1-2 10 Inch Sub TW1 Series Shallow Mount Subwoofer 2 ohm 300w RMS

JL_Audio_10TW1_2_10_Inch_Sub_TW1_Series_Shallow_Mount_Subwoofer_2_ohm_300w_RMS_01_tai
JL Audio 10TW1-2 10 Inch Sub TW1 Series Shallow Mount Subwoofer 2 ohm 300w RMS
JL Audio 10TW1-2 10 Inch Sub TW1 Series Shallow Mount Subwoofer 2 ohm 300w RMS
JL Audio 10TW1-2 10 Inch Sub TW1 Series Shallow Mount Subwoofer 2 ohm 300w RMS
JL Audio 10TW1-2 10 Inch Sub TW1 Series Shallow Mount Subwoofer 2 ohm 300w RMS
JL Audio 10TW1-2 10 Inch Sub TW1 Series Shallow Mount Subwoofer 2 ohm 300w RMS
JL Audio 10TW1-2 10 Inch Sub TW1 Series Shallow Mount Subwoofer 2 ohm 300w RMS
JL Audio 10TW1-2 10 Inch Sub TW1 Series Shallow Mount Subwoofer 2 ohm 300w RMS
JL Audio 10TW1-2 10 Inch Sub TW1 Series Shallow Mount Subwoofer 2 ohm 300w RMS

JL Audio 10TW1-2 10 Inch Sub TW1 Series Shallow Mount Subwoofer 2 ohm 300w RMS
Welcome to CEN Automotive. Order by 2PM weekdays for Same Day Dispatch. JL Audio 10TW1-2 10 Inch Sub TW1 Series Shallow Mount Subwoofer 2 ohm 300w RMS. 10-inch (250 mm) Subwoofer Driver, 2 O. TW1 10-inch Subwoofer (300 W, 2 O). Built on JL Audio’s patented thin-line subwoofer technology, the 10TW1 delivers a powerful combination of shallow mounting depth and excursion capability, while operating in insanely small enclosures 0.35 cu. This, combined with a special cast alloy frame design, makes the 10TW1 capable of operating in extremely tight spaces. These include under-seat installations in trucks, 2-seat sports cars and many other creative applications requiring a compact, low profile subwoofer design. JL Audio’s patented thin-line woofer technology compresses the architecture of the 10TW1 using a “concentric tube” structure built into the injection-molded cone body. This structure supports the voice coil and a full annular spider, while permitting the placement of a large motor structure further forward in the speaker than with conventional designs. The 10TW1 also features a clever frame design that minimizes the frontal clearance required for the excursion of the driver. This is accomplished by recessing the suspension attachment surface, so that most of the forward excursion occurs within the frame’s dimensions. Thanks to this feature, the 10TW1 requires only 0.87 inches (22 mm) of frontal clearance, even with its grille installed. This allows for more efficient use of space and increased enclosure volume within a given overall depth. Even though the 10TW1 is optimized for an enclosure much smaller than any other JL Audio ten-inch Subwoofer, it never sounds like a big woofer struggling in a tiny box… Instead, it delivers all the rich, deep, controlled bass you have come to expect from a JL Audio subwoofer system. Very shallow mounting depth (4.36 in / 111 mm). No pole vent: permits mounting close to rear wall of enclosure. Extremely small sealed enclosure volume requirements. Long linear excursion capability (0.40 in / 10 mm, one-way). Patented “concentric tube” architecture. Patented “floating cone attach method” technology. Cast alloy frame with flat edges for tight driver grouping. Injection molded, mica-filled polypropylene cone. Steel mesh grille included with each driver. Precision-built in USA at JL Audio’s Miramar, Florida factory with global components. Recommended Amplifier Power (RMS) 75 – 300 W. Nominal Impedance (Znom) 2 O. Nominal Diameter 10.0 in / 250 mm. Overall Diameter (A) 10.375 in / 264 mm. Mounting Hole Diameter (B) 9.0625 in / 230 mm. Bolt Hole Circle Diameter (C) 9.7 in / 246 mm. Motor Outer Diameter (D) 4.54 in / 115 mm. Mounting Depth (E) 4.36 in / 111 mm. Front Grille Protrusion (F) 0.87 in / 22 mm. Driver Displacement 0.047 cu ft / 1.33 L. Net Weight 10.5 lb / 4.8 kg. Free Air Resonance (Fs) 38.09 Hz. Electrical “Q” (Qes) 0.639. Mechanical “Q” (Qms) 10.07. Total Speaker “Q” (Qts) 0.601. Equivalent Compliance (Vas) 0.429 cu ft / 12.15 L. One-Way Linear Excursion (Xmax) 0.40 in / 10.0 mm. Efficiency (1 W / 1 m) 82.2 dB SPL. Effective Piston Area (Sd) 41.602 sq in / 0.0268 sq m. DC Resistance (Re) 2.428 O. Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied. Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is “louder”. This item is in the category “Vehicle Parts & Accessories\In-Car Technology, GPS & Security\In-Car Entertainment\Subwoofers”. The seller is “cenautomotive” and is located in this country: GB. This item can be shipped to United Kingdom.
  • Brand: JL Audio
  • MPN: 10TW1-2
  • Model: 10TW1-2
  • Manufacturer Part Number: 10TW1-2
  • Colour: Black
  • Custom Bundle: No
  • Modified Item: No
  • Unit Type: Unit
  • Features: Shallow Mount
  • Number of Driver: 1
  • Impedance: 2 Ω
  • Placement on Vehicle: Boot
  • Size: 10 Inch
  • Series: TW1
  • RMS Power: 300w
  • Driver: Subwoofer
  • Warranty: 2 Year Warranty
  • Manufacturer: JL Audio
  • Type: Subwoofer
  • Voice Coil: Dual
  • Manufacturer Warranty: 2 Year Warranty
  • Authorised Dealer: CEN Automotive
  • Reference OE/OEM Number: 10TW1-2
  • EAN: 635963957629

JL Audio 10TW1-2 10 Inch Sub TW1 Series Shallow Mount Subwoofer 2 ohm 300w RMS

JL Audio 12TW1-4 12 Inch Sub TW1 Series Shallow Mount Subwoofer 4 ohm 300w RMS

JL_Audio_12TW1_4_12_Inch_Sub_TW1_Series_Shallow_Mount_Subwoofer_4_ohm_300w_RMS_01_ydgi
JL Audio 12TW1-4 12 Inch Sub TW1 Series Shallow Mount Subwoofer 4 ohm 300w RMS
JL Audio 12TW1-4 12 Inch Sub TW1 Series Shallow Mount Subwoofer 4 ohm 300w RMS
JL Audio 12TW1-4 12 Inch Sub TW1 Series Shallow Mount Subwoofer 4 ohm 300w RMS
JL Audio 12TW1-4 12 Inch Sub TW1 Series Shallow Mount Subwoofer 4 ohm 300w RMS
JL Audio 12TW1-4 12 Inch Sub TW1 Series Shallow Mount Subwoofer 4 ohm 300w RMS
JL Audio 12TW1-4 12 Inch Sub TW1 Series Shallow Mount Subwoofer 4 ohm 300w RMS
JL Audio 12TW1-4 12 Inch Sub TW1 Series Shallow Mount Subwoofer 4 ohm 300w RMS
JL Audio 12TW1-4 12 Inch Sub TW1 Series Shallow Mount Subwoofer 4 ohm 300w RMS
JL Audio 12TW1-4 12 Inch Sub TW1 Series Shallow Mount Subwoofer 4 ohm 300w RMS

JL Audio 12TW1-4 12 Inch Sub TW1 Series Shallow Mount Subwoofer 4 ohm 300w RMS
Welcome to CEN Automotive. Order by 2PM weekdays for Same Day Dispatch. JL Audio 12TW1-4 12 Inch Sub TW1 Series Shallow Mount Subwoofer 4 ohm 300w RMS. 12-inch (300 mm) Subwoofer Driver, 4 O. TW1 12-inch Subwoofer (300 W, 4 O). Built on JL Audio’s patented thin-line subwoofer technology, the 12TW1 delivers a powerful combination of shallow mounting depth and excursion capability, while operating in insanely small enclosures 0.65 cu. / 18.4 liters. This, combined with a special cast alloy frame design, makes the 12TW1 capable of operating in extremely tight spaces. These include under-seat installations in trucks, 2-seat sports cars and many other creative applications requiring a compact, low profile subwoofer design. JL Audio’s patented thin-line woofer technology compresses the architecture of the 12TW1 using a “concentric tube” structure built into the injection-molded cone body. This structure supports the voice coil and a full annular spider, while permitting the placement of a large motor structure further forward in the speaker than with conventional designs. The 12TW1 also features a clever frame design that minimizes the frontal clearance required for the excursion of the driver. This is accomplished by recessing the suspension attachment surface, so that most of the forward excursion occurs within the frame’s dimensions. Thanks to this feature, the 12TW1 requires only 0.87 inches (22 mm) of frontal clearance, even with its grille installed. This allows for more efficient use of space and increased enclosure volume within a given overall depth. Even though the 12TW1 is optimized for an enclosure much smaller than any other JL Audio twelve-inch Subwoofer, it never sounds like a big woofer struggling in a tiny box… Instead, it delivers all the rich, deep, controlled bass you have come to expect from a JL Audio subwoofer system. Very shallow mounting depth (4.62 in / 117 mm). No pole vent: permits mounting close to rear wall of enclosure. Extremely small sealed enclosure volume requirements. Long linear excursion capability (0.40 in / 10 mm, one-way). Patented “concentric tube” architecture. Patented “floating cone attach method” technology. Cast alloy frame with flat edges for tight driver grouping. Injection molded, mica-filled polypropylene cone. Steel mesh grille included with each driver. Precision-built in USA at JL Audio’s Miramar, Florida factory with global components. Recommended Amplifier Power (RMS) 75 – 300 W. Nominal Impedance (Znom) 4 O. Nominal Diameter 12.0 in / 300 mm. Overall Diameter (A) 12.375 in / 314 mm. Mounting Hole Diameter (B) 11.0625 in / 281 mm. Bolt Hole Circle Diameter (C) 11.7 in / 297 mm. Motor Outer Diameter (D) 5.71 in / 145 mm. Mounting Depth (E) 4.62 in / 117 mm. Front Grille Protrusion (F) 0.87 in / 22 mm. Driver Displacement 0.072 cu ft / 2.04 L. Net Weight 16.5 lb / 7.5 kg. Free Air Resonance (Fs) 32.35 Hz. Electrical “Q” (Qes) 0.555. Mechanical “Q” (Qms) 11.066. Total Speaker “Q” (Qts) 0.529. Equivalent Compliance (Vas) 1.189 cu ft / 33.67 L. One-Way Linear Excursion (Xmax) 0.40 in / 10.0 mm. Efficiency (1 W / 1 m) 85.15 dB SPL. Effective Piston Area (Sd) 67.608 sq in / 0.0436 sq m. DC Resistance (Re) 3.514 O. Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied. Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is “louder”. This item is in the category “Vehicle Parts & Accessories\In-Car Technology, GPS & Security\In-Car Entertainment\Subwoofers”. The seller is “cenautomotive” and is located in this country: GB. This item can be shipped to United Kingdom.
  • Brand: JL Audio
  • MPN: 12TW1-4
  • Model: 12TW1-4
  • Manufacturer Part Number: 12TW1-4
  • Colour: Black
  • Custom Bundle: No
  • Modified Item: No
  • Unit Type: Unit
  • Features: Shallow Mount
  • Number of Driver: 1
  • Impedance: 4 Ω
  • Placement on Vehicle: Boot
  • Size: 12 Inch
  • Series: TW1
  • RMS Power: 300w
  • Driver: Subwoofer
  • Warranty: 2 Year Warranty
  • Manufacturer: JL Audio
  • Type: Subwoofer
  • Voice Coil: Dual
  • Manufacturer Warranty: 2 Year Warranty
  • Authorised Dealer: CEN Automotive
  • EAN: 699440990448

JL Audio 12TW1-4 12 Inch Sub TW1 Series Shallow Mount Subwoofer 4 ohm 300w RMS

Pioneer TS-A3000LS4 12 Shallow Mount Car Subwoofer 1500W

Pioneer_TS_A3000LS4_12_Shallow_Mount_Car_Subwoofer_1500W_01_oy
Pioneer TS-A3000LS4 12 Shallow Mount Car Subwoofer 1500W

Pioneer TS-A3000LS4 12 Shallow Mount Car Subwoofer 1500W
12 4-ohm shallow subwoofer. Injected polypropylene cone with rubber surround. Frequency response: 20-1,000 Hz. Sealed box volume: 0.5-1.0 cubic feet. Ported box volume: 0.65-1.0 cubic feet. 1 Car Audio Security Ltd is a UK based company. RIO, IOM, IOW, NI etc etc. This item is in the category “Vehicle Parts & Accessories\In-Car Technology, GPS & Security\In-Car Entertainment\Subwoofers”. The seller is “caraudiosecurityltd” and is located in this country: GB. This item can be shipped to United Kingdom, Antigua and Barbuda, Austria, Belgium, Bulgaria, Croatia, Republic of, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Brazil, Japan, New Zealand, China, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, Korea, South, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei Darussalam, Cayman Islands, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French Guiana, Iceland, Jersey, Jordan, Cambodia, Saint Kitts-Nevis, Saint Lucia, Liechtenstein, Sri Lanka, Macau, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and Caicos Islands, Aruba, Saudi Arabia, South Africa, United Arab Emirates, Chile, Bahamas, Colombia, Costa Rica, Dominican Republic, Guatemala, Honduras, Jamaica, Kuwait, Panama, Philippines, Qatar, El Salvador, Trinidad and Tobago, Uruguay, Vietnam, Israel.
  • Size: 12 in
  • Manufacturer Part Number: TS-A3000LS4
  • Brand: Pioneer

Pioneer TS-A3000LS4 12 Shallow Mount Car Subwoofer 1500W

Rockford Fosgate R2SD2-12 12 Prime 400W Slim Shallow Mount Car Subwoofer

Rockford_Fosgate_R2SD2_12_12_Prime_400W_Slim_Shallow_Mount_Car_Subwoofer_01_kwj
Rockford Fosgate R2SD2-12 12 Prime 400W Slim Shallow Mount Car Subwoofer
Rockford Fosgate R2SD2-12 12 Prime 400W Slim Shallow Mount Car Subwoofer
Rockford Fosgate R2SD2-12 12 Prime 400W Slim Shallow Mount Car Subwoofer
Rockford Fosgate R2SD2-12 12 Prime 400W Slim Shallow Mount Car Subwoofer
Rockford Fosgate R2SD2-12 12 Prime 400W Slim Shallow Mount Car Subwoofer

Rockford Fosgate R2SD2-12 12 Prime 400W Slim Shallow Mount Car Subwoofer
Rockford Fosgate R2SD2-12 – 12 Prime 400W Shallow Mount Subwoofer. When you have no space for bass, our R2 12 shallow subwoofer can help satisfy your need for low frequency music. These drivers can fit in tight spaces due to an elevated motor structure that reduces speaker depth. Mica injected polypropylene cones make sure bass notes are clean and accurate. Stamp-cast baskets feature spider venting typically reserved for traditional depth mounted models to keep the motor cool! These shallow subwoofers are optimized for sealed enclosures. 12 AWG compression terminals. Anodized aluminium voice coil former. Optimized for sealed enclosures. Mica injected polypropylene cone. Linear spider with embedded 16 AWG tinsel leads. StampCast basket with integrated spider venting. Integrated PVC trim ring. Nominal Impedance: Dual 2-Ohm. Voice Coil Diameter: 2 (51 mm). Magnet Weight (oz): 51 oz. Speaker Connector: Dual 12 AWG compression. Fs (Hz): 29.7. Re (Ohms): 3.80. Le (mH): 4.2. Vas (Litres): 65.4. Sd (cm2): 534.8. Xmax (mm): 10.0. Woofer Displacement (in): 0.039 cu. Cutout Diameter (in): 11.25 in. Mounting Depth (in): 3.602 in. This includes the following areas: Jersey, Guernsey, Isle of Man, Isle of Wight, N. This item is in the category “Vehicle Parts & Accessories\In-Car Technology, GPS & Security\In-Car Entertainment\Subwoofers”. The seller is “caraudiodirect-uk” and is located in this country: GB. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Republic of, Cyprus, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Spain, Sweden, Norway, Switzerland, Guernsey, Iceland, Jersey.
  • Size: 12 in
  • Impedance: Dual 2Ω
  • Features: Slim, Shallow
  • MPN: Rockford Fosgate R2SD2-12
  • RMS Power: 250W
  • Manufacturer Part Number: R2SD2-12
  • Part Number: R2SD2-12
  • Subwoofer Size: 12\
  • Subwoofer Type: Subwoofer Speaker
  • Placement on Vehicle: Boot, Spare Wheel Recess, Under Seat
  • Brand: Rockford Fosgate

Rockford Fosgate R2SD2-12 12 Prime 400W Slim Shallow Mount Car Subwoofer