Tag: single
Audison Prima APBMW S8-4.2 Single 4ohm Plug & Play Under Seat Subwoofer BMW 150w
Audison Prima was designed to meet the interest of the car model enthusiasts who like to appreciate all the nuances of the musical message with components that are perfectly integrated in the car OEM system, preserving the most precious Prima on Audison requirement of OEM integration: space. Developed with electroacoustic parameters customized for BMW-Mini to increase listening engagement, through powerful and crisp low frequencies, exploiting the acoustic load provided by the factory box. Neodymium Magnetic group with an inverted acoustic structure featuring an internal cone, to maximize performance while minimizing bulk and weight. 38 mm voice coil wound on aluminum support for considerable power dissipation and stability even during high excursions. Two 5 mm gaskets were provided for OEM placements. The 200 mm 8 in. APBMW S subwoofers allow a direct replacement of the OEM speakers underneath the front seats, making the most of the factory acoustic load and generating deep and crisp low frequencies. The Neodymium magnet allows for greater power and control than ferrite while maintaining the depth of installation unaltered. Frequency Response 40-500 Hz. Voice Coil Ø 50 mm. Voice Coil Material COPPER. Woofer Qes 0.96. Cone Material PRESSED PAPER CONE. Driver Displacement Volume 1.2. Re 3.8 Ohm. Cms 0.41 mm/N. BL 6.3 T. M. Diaphragm Area 198.6 cm2. Le Standard 0.5 mH. Reference Efficiency 0.13. To be eligible for a return, your item must be unused and in the same condition that you received it, and it must be in the original packaging.
Audison Prima APBMW S8-2.2 Single 2ohm Plug & Play Under Seat Subwoofer BMW 150w
THIS PRICE IS FOR A SINGLE SUBWOOFER. These subwoofers have been designed with electro-acoustic parameters that maximize performance for the factory box available below the seats. The ABS plastic basket, reinforced with fiberglass, and the acoustic structure featuring a front magnet, provide for a minimal installation depth for a perfect compatibility with the whole range. Two 5 mm polyurethane gaskets, supplied, allow the subwoofer to fit perfectly to the box, decoupling it from vibration. The 200 mm (8?) APBMW S subwoofers allow a “direct replacement” of the OEM speakers underneath the front seats, making the most of the factory acoustic load and generating deep and crisp low frequencies. You can choose between S8-2 with 2 ohm impedance and S8-4 with 4 ohm impedance for improved system composition versatility. In fact, in the mid-high passive filtered system configuration, with the crossover provided, 4 of the 8-channels of the AP 8.9 bit can be configured in bridge mode delivering 130W rms to each S8-4 installed under the seat. The S8-2 can be used in a fully active, multi-amplified front system, maximizing the power of the AP 8.9 bit at 2 ohms, and employing additional 2 channels for the rear system. The Neodymium magnet used on S8-4 and S8-2 allows for greater power and control than ferrite, while maintaining the depth of installation unaltered. Magnet size D x d x h. 48 (1.89) x 18 (0.71) x 7 (0.28). Weight of one speaker. 1,21 (2.67). Developed with electroacoustic parameters customized for BMW-Mini. To increase listening engagement, through powerful and crisp low frequencies, exploiting the acoustic load provided by the factory box. With an inverted acoustic structure featuring an internal cone, to maximize performance while minimizing bulk and weight. 38 mm voice coil wound on aluminium support. For a considerable power dissipation and stability even during high excursions. Two 5 mm gaskets provided. 2 ohm configuration for maximum output. IF used in combination with AP 8.9 bit in active multi-amplification. Below Compatibility List is for Vehicles with the BASE AUDIO. (These Vehicles Have No Original Tweeters or Amplifier). BASE AUDIO COMPATIBILITY LIST.
Audison Prima APBMW S8-2.2 Single 2ohm Plug & Play Under Seat Subwoofer BMW 150w
THIS PRICE IS FOR A SINGLE SUBWOOFER. These subwoofers have been designed with electro-acoustic parameters that maximize performance for the factory box available below the seats. The ABS plastic basket, reinforced with fiberglass, and the acoustic structure featuring a front magnet, provide for a minimal installation depth for a perfect compatibility with the whole range. Two 5 mm polyurethane gaskets, supplied, allow the subwoofer to fit perfectly to the box, decoupling it from vibration. The 200 mm (8?) APBMW S subwoofers allow a “direct replacement” of the OEM speakers underneath the front seats, making the most of the factory acoustic load and generating deep and crisp low frequencies. You can choose between S8-2 with 2 ohm impedance and S8-4 with 4 ohm impedance for improved system composition versatility. In fact, in the mid-high passive filtered system configuration, with the crossover provided, 4 of the 8-channels of the AP 8.9 bit can be configured in bridge mode delivering 130W rms to each S8-4 installed under the seat. The S8-2 can be used in a fully active, multi-amplified front system, maximizing the power of the AP 8.9 bit at 2 ohms, and employing additional 2 channels for the rear system. The Neodymium magnet used on S8-4 and S8-2 allows for greater power and control than ferrite, while maintaining the depth of installation unaltered. Magnet size D x d x h. 48 (1.89) x 18 (0.71) x 7 (0.28). Weight of one speaker. 1,21 (2.67). Developed with electroacoustic parameters customized for BMW-Mini. To increase listening engagement, through powerful and crisp low frequencies, exploiting the acoustic load provided by the factory box. With an inverted acoustic structure featuring an internal cone, to maximize performance while minimizing bulk and weight. 38 mm voice coil wound on aluminium support. For a considerable power dissipation and stability even during high excursions. Two 5 mm gaskets provided. 2 ohm configuration for maximum output. IF used in combination with AP 8.9 bit in active multi-amplification. Below Compatibility List is for Vehicles with the BASE AUDIO. (These Vehicles Have No Original Tweeters or Amplifier). BASE AUDIO COMPATIBILITY LIST.
Kicker Car Audio CompC 10 in. Subwoofer Single Voice Coil 4 Ohm 30-500 Hz Black
Kicker Car Audio CompC 10 in. Subwoofer Single Voice Coil 4 Ohm 30-500 Hz Black. Kicker Car Audio L7R 15 in. Subwoofer Square Dual Voice Coil 2 Ohm 20-100 Hz AMP. Kicker Car Audio CompR 15 in. Subwoofer Dual Voice Coil 4 Ohm 800 W Black AMP.
KICKER 48CWR84 8 20cm 600 Watts Single Voice Coil Car Van Boot Sub Subwoofer
Kicker designed their CompR subs for people who love to hear powerful low-frequency punch in their music. This Kicker CompR sub will handle up to 300 watts RMS so make sure you have an amplifier that’ll do it justice.
Audison Prima APBMW S8-4.2 Single 4ohm Plug & Play Under Seat Subwoofer BMW 150w
Prima APBMW S8-4.2 Single. The 200 mm 8 in. Audison Prima APBMW S8 4ohm Subwoofer. Woofer Qes 0.96. 38 mm voice coil wound on aluminum support for considerable power dissipation and stability even during high excursions.
Focal SUB10SLIM 10 Single 4 Ohm 460W Car Shallow Slim Subwoofer
Designed and developed in France, the Sub 10 Slim benefits from Focal’s sound savoir-faire. With its 10 (25 cm) polypropylene cone, this subwoofer provides an excellent bass boost for any on-board audio system.
Focal SUB10SLIM PERFORMANCE 10 Single 4 Ohm Car Slim Subwoofer 500W Bass Sub
Designed and developed in France, the Sub 10 Slim benefits from Focal’s renowned savoir-faire. With its 25cm polypropylene cone, this subwoofer provides an excellent bass boost for any on-board audio system. It has a single-coil architecture for simplicity and efficacy. With a much shallower depth than a standard subwoofer, this product is easily installed into restricted spaces such as the sides of a car boot. Type For sealed enclosure. Nominal power 230W RMS. Sensitivity (2.83V/1m) 85dB. 1 Car Audio Security Ltd is a UK based company. RIO, IOM, IOW, JERSEY, GUERNSEY, SHETLANDS, N.
Rockford Fosgate P300-12 Single 12 300 Watt Sealed Powered Active Subwoofer
Rockford Fosgate P300-12 Single 12 300 Watt Sealed Powered Active Subwoofer. If you need to quickly add bass to a system or want to alleviate the hassle of separate amplifiers and subwoofers, then the P300-12 is the right one for the job! The P300-12 features a Punch 12 subwoofer in a custom sealed enclosure and is powered by a mighty 300-Watt amplifier. The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving. Features a durable exterior that resists scrapes and bumps while in the trunk or cargo area. The P300-12 powered subwoofer is an “all-in-one” solution when adding bass to a factory system or just to save space. This model features a 12 subwoofer in a sealed enclosure powered by an internal 300-watt amplifier. “Closed-loop” design ensures optimum performance between woofer, amplifier and enclosure. Built-in 0°/180° phase switch. Separate low level and speaker level inputs. Built-in adjustable bass boost EQ. Adjustable 12db/Octave low pass crossover. Intelligent auto turn on/off function. Thermal and over voltage protection. High-efficiency, low current design. Remote bass level control included. Proprietary high output woofer. Constructed with 5/8 MDF. Large AWG input terminals. Covered with industrial heat activated vinyl. Nominal Impedance (ea): n/a. Enclosure Material: 5/8 MDF (Medium Density Fibreboard). Frequency Response: 35Hz to 150Hz. Integrated Amplifier: 300 Watts RMS. Gain & Bass Boost. Low-Level: 1 RCA Pair. High-Level: Left/Right Summed Inputs. Power Input Connector: Removable Connector Power/Ground/Remote. Power Wire Gauge: 8 AWG. Heat Sink Type: Extruded Aluminium. Visual Indicators: Power Protect. Dimensions – Box (H x W x D) / Wedge (H x W x D1 x D2). 15 x 19.8 x D1 11 – D2 7 (in). 38.1 x 50.29 x D1 27.94 – D2 17.78 (cm).