Audison Prima APBMW S8-2.2 Single 2ohm Plug & Play Under Seat Subwoofer BMW 150w

Audison_Prima_APBMW_S8_2_2_Single_2ohm_Plug_Play_Under_Seat_Subwoofer_BMW_150w_01_jkl
Audison Prima APBMW S8-2.2 Single 2ohm Plug & Play Under Seat Subwoofer BMW 150w

Audison Prima APBMW S8-2.2 Single 2ohm Plug & Play Under Seat Subwoofer BMW 150w
THIS PRICE IS FOR A SINGLE SUBWOOFER. These subwoofers have been designed with electro-acoustic parameters that maximize performance for the factory box available below the seats. The ABS plastic basket, reinforced with fiberglass, and the acoustic structure featuring a front magnet, provide for a minimal installation depth for a perfect compatibility with the whole range. Two 5 mm polyurethane gaskets, supplied, allow the subwoofer to fit perfectly to the box, decoupling it from vibration. The 200 mm (8?) APBMW S subwoofers allow a “direct replacement” of the OEM speakers underneath the front seats, making the most of the factory acoustic load and generating deep and crisp low frequencies. You can choose between S8-2 with 2 ohm impedance and S8-4 with 4 ohm impedance for improved system composition versatility. In fact, in the mid-high passive filtered system configuration, with the crossover provided, 4 of the 8-channels of the AP 8.9 bit can be configured in bridge mode delivering 130W rms to each S8-4 installed under the seat. The S8-2 can be used in a fully active, multi-amplified front system, maximizing the power of the AP 8.9 bit at 2 ohms, and employing additional 2 channels for the rear system. The Neodymium magnet used on S8-4 and S8-2 allows for greater power and control than ferrite, while maintaining the depth of installation unaltered. Magnet size D x d x h. 48 (1.89) x 18 (0.71) x 7 (0.28). Weight of one speaker. 1,21 (2.67). Developed with electroacoustic parameters customized for BMW-Mini. To increase listening engagement, through powerful and crisp low frequencies, exploiting the acoustic load provided by the factory box. With an inverted acoustic structure featuring an internal cone, to maximize performance while minimizing bulk and weight. 38 mm voice coil wound on aluminium support. For a considerable power dissipation and stability even during high excursions. Two 5 mm gaskets provided. 2 ohm configuration for maximum output. IF used in combination with AP 8.9 bit in active multi-amplification. Below Compatibility List is for Vehicles with the BASE AUDIO. (These Vehicles Have No Original Tweeters or Amplifier). BASE AUDIO COMPATIBILITY LIST.
Audison Prima APBMW S8-2.2 Single 2ohm Plug & Play Under Seat Subwoofer BMW 150w

Vibe PulseC8A 240 watt Active Slim Under Seat Subwoofer

Vibe_PulseC8A_240_watt_Active_Slim_Under_Seat_Subwoofer_01_kqi
Vibe PulseC8A 240 watt Active Slim Under Seat Subwoofer

Vibe PulseC8A 240 watt Active Slim Under Seat Subwoofer
Unique 6″ x 8″ subwoofer enclosure allows fitment in the most challenging of spaces, even under a seat. Cast aluminium chassis provides maximum durability and keeps enclosure weight to a minimum. High level input with Auto sense circuit allows the amplifier to turn on and off when using high level input without the need for a remote turn on wire. Wired remote gives full control of the subwoofer volume from the front of the vehicle. Height : 2.8 (72mm). Width : 11.4 (290mm). Depth : 8.3 (210mm). Configuration : 2nd order acoustic suspension. Enclosure Type : Active Slim Fit Bass Enclosure.
Vibe PulseC8A 240 watt Active Slim Under Seat Subwoofer